Benly has me Bushed

Waveblaster · Post by **Waveblaster** » Fri May 29, 2015 4:42 am

Greetings

I was trying to fit the rear wheel to the Benly and I noticed that it is missing a bush on the left rear item number 13.

If someone has some time could they provide the measurements please

I believe it is 22mm ID . Need the OD and width

http://www.cmsnl.com/honda-c92cs92-benl ... ml#results

Cheers

Greg

Spokes · Post by **Spokes** » Fri May 29, 2015 9:53 am

ID 22.00mm OD 28.84mm Width:9.46mm

The above measurements are from a CA95 rear hub spacer.

I have a spare (the one I measured) if you have the time to wait for delivery.

Waveblaster · Post by **Waveblaster** » Sat May 30, 2015 8:35 am

Thanks for the help and offer of the part. I will keep in mind. At this stage I will turn one up on the lathe.

regards

Greg