Strange though, that white wire was missing too. However, it never ceases to amaze me what a PO might do to "fix" an item. Case in point: my CA95#2 was purchased complete for $300 becuase seller "couldn't get spark". The hot wire from the wiring harness was attached to the fuse, yet the other wire with eyelet that is supposed to lead to the battery was simply missing. I added the "missing link" and viola; spark! (Glad I had a spare wiring harness to compare and a wiring diagram to follow!)
Key Switch Question
OMG...
I've never seen so much grease inside a switch before; that certrainly isn't good!
Strange though, that white wire was missing too. However, it never ceases to amaze me what a PO might do to "fix" an item. Case in point: my CA95#2 was purchased complete for $300 becuase seller "couldn't get spark". The hot wire from the wiring harness was attached to the fuse, yet the other wire with eyelet that is supposed to lead to the battery was simply missing. I added the "missing link" and viola; spark! (Glad I had a spare wiring harness to compare and a wiring diagram to follow!)
Strange though, that white wire was missing too. However, it never ceases to amaze me what a PO might do to "fix" an item. Case in point: my CA95#2 was purchased complete for $300 becuase seller "couldn't get spark". The hot wire from the wiring harness was attached to the fuse, yet the other wire with eyelet that is supposed to lead to the battery was simply missing. I added the "missing link" and viola; spark! (Glad I had a spare wiring harness to compare and a wiring diagram to follow!)
-
comp_wiz101
- Posts: 172
- Joined: Tue Aug 31, 2010 8:33 pm
frappy wrote:
However, it never ceases to amaze me what a PO might do to "fix" an item.
My bike had some interesting ideas... the petcock was rebuilt without a proper kit, so the spring loaded pressure plate was replaced with a home made plate held to the petcock body with a screw.
The foot shifter shaft circlip was replaced with a hose clamp... but the circlip was still on the shaft, sliding around!
-
Steverinomeiste
- Posts: 223
- Joined: Sun Apr 01, 2012 11:52 pm
Key Switch Installed
My switch arrived from Chip. Of course it looks great it will be the last switch this bike will ever need. Thank you Spokes. Reading about all the grease in it makes me wonder if the locksmith who made the key might have done that. Now the headlight Kartgreen gave me lights up now and both beams work. I am going to make a video of it in operation tomorrow and post the link. Thanks again.
Steve
Steve
-
Steverinomeiste
- Posts: 223
- Joined: Sun Apr 01, 2012 11:52 pm
Rebuilt keyswitch Sealed Beam Headlight Installed
Hi Everyone:
Here is a video of my CA95 with the Keyswitch Spokes rebuilt for me and the Headlight that Kartgreen gave me. You Meet the Nicest People on a Honda.
http://www.youtube.com/watch?v=C8h94PNJIG4&feature=plcp
Here is a video of my CA95 with the Keyswitch Spokes rebuilt for me and the Headlight that Kartgreen gave me. You Meet the Nicest People on a Honda.
http://www.youtube.com/watch?v=C8h94PNJIG4&feature=plcp
-
comp_wiz101
- Posts: 172
- Joined: Tue Aug 31, 2010 8:33 pm
I love it! That little switch traveled coast to coast! Congrats! BTW..don't be too concerned with the light being on with the 1st click of the switch. Current bikes are also wired to have their lights on when the bike is running, it's a safety thing and I believe it is mandatory.
Last edited by Spokes on Sun Nov 18, 2012 6:19 pm, edited 1 time in total.
-
Steverinomeiste
- Posts: 223
- Joined: Sun Apr 01, 2012 11:52 pm
-
Larzfromarz
- Posts: 620
- Joined: Tue Dec 20, 2011 7:47 pm
-
Steverinomeiste
- Posts: 223
- Joined: Sun Apr 01, 2012 11:52 pm