Thread
:
Aprilia Mille HID Projector Installation
View Single Post
#
6
11-26-2011, 11:08 PM
Smithers
Admin
Join Date: Feb 2004
Location: San Luis Obispo, CA
Posts: 3,238
There is a chrome reflector part to the housing that the actual light bulbs are mounted in. This reflective panel pivots a little bit and is held in place by a couple long screw type adjusters. They are a little tricky to snap apart and they are held in place by some little steel collars that need to be removed with a screwdriver or a pick. Here are some pictures to try and help show what's going on between the outer black housing and the chrome reflective part.
Once the black spring collars are popped off you can use a screwdriver to pop the ball end part free from the white plastic piece.
And here are the little spring collars that hold the plastic so that the adjuster screws don't pop out of the pivot type joint.
And now you can separate the front chrome panel from the back housing. Get ready to chop a big hole in this part now.
Smithers
View Public Profile
Visit Smithers's homepage!
Find all posts by Smithers