FourWheelForum  

Go Back   FourWheelForum > Motorcycles & Streetbikes! > The Honda CA95 / Benly 150 Restoration

The Honda CA95 / Benly 150 Restoration The little brother to the CA160 in our family of Hondas

Reply
Thread Tools
  #1  
Unread 06-22-2017, 03:00 PM
brookville brookville is offline
Junior Member
 
Join Date: Apr 2011
Posts: 22
Default Engine Tubing

I know that two of the tubes , from the top of the engine and the carb block goes to the breather but, the two that come out of the head, do they connect to each other with a single tube or should they also be open? Sorry this was a question for my 305

Last edited by brookville; 06-23-2017 at 01:02 PM. Reason: wrong information
Reply With Quote
  #2  
Unread 06-29-2017, 04:37 PM
rhodemon rhodemon is offline
Member
 
Join Date: Jun 2009
Posts: 41
Default

The tubes that come out of the head ventilate the intake valve guides to the atmosphere in order to break any vacuum that may exist in them and thus prevent oil from being sucked down into the combustion chamber

The 150's and 305's engine have the same setup.
Reply With Quote
  #3  
Unread 06-30-2017, 06:21 AM
brookville brookville is offline
Junior Member
 
Join Date: Apr 2011
Posts: 22
Default

Thanks for the reply. Does this mean that the two should be tubed separately and allow separate evacuation or should they be tubed together with a single tube. I have seen the latter more often than them being separated. Hope this made since. Thanks again.
Norm
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 02:03 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.