|
The Honda CA95 / Benly 150 Restoration The little brother to the CA160 in our family of Hondas |
Thread Tools |
#1
|
|||
|
|||
M5 x 0.9 threads
I dont know how you get round the problem but my petcock to tank screws, points cover, and points back plate screws are all made from unobtainium.
They all use 5 mm screws with 0.9 pitch rather than the now standard 0.8 pitch. I got round the pet cock problem by tapping the tank to 1 BA which is very close and using Amal twist grip screws, common to most brit bike of the 60's. I recently found these listed on the uk website of a chinese scooter supplier M5x0.9 hex bolts in 12 mm 16 mm and 22mm thread length and a 16mm long allen screw Im going to check some local shops and see if these threads are common on chinese stuff. http://www.chinesemotorcyclepartsonl...4ALLENM516.php |