FourWheelForum  

Go Back   FourWheelForum > Motorcycles & Streetbikes! > The Honda CA95 / Benly 150 Restoration

The Honda CA95 / Benly 150 Restoration The little brother to the CA160 in our family of Hondas

Reply
Thread Tools
  #31  
Unread 12-02-2012, 07:01 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

I haven't posted for awhile so here's a brief update: Bike stripped to a bare frame, got a piston so the motor's back together, started tp clean and sand body parts (forks, headlight housing, swing arm) and started polishing some of the shiny bits. Cliff.




Reply With Quote
  #32  
Unread 02-08-2014, 05:12 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

I haven't posted for a VERY long time on this build. Between getting busy in other directions and getting discouraged so things have slowed to a slug's pace. However, in answer to a parts/bike wanted ad I run regularly a "parts' bike appeared. $200 and it's mine with papers. The engine came in a box, all apart and needing some extra parts which several members here have helped with. Wheels came too. And, it's better than the one I'm working on. So, the parts bike will go to the front of the line and the red one will have to wait patiently for awhile. It may have to wait until the CM90 gets done.
Here it is in all it's glory.



The engine has been taken apart and cleaned, new cylinders obtained, new exhaust valve, piston on it's way (thanks Spokes) and the work continues.



So, onward and upward. 2 Benly's -ha!

Cliff.
Reply With Quote
  #33  
Unread 02-10-2014, 01:08 PM
ByTheLake's Avatar
ByTheLake ByTheLake is offline
Senior Member
 
Join Date: Oct 2011
Location: Alden, MI USA
Posts: 730
Send a message via AIM to ByTheLake
Default

Cliff, there's definitely a story in that wrinkled back fender. Somebody scuffed an elbow a few decades ago.
Reply With Quote
  #34  
Unread 02-19-2015, 08:50 AM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

Fun in the garage. Too many projects on the go.


Motivation
Reply With Quote
  #35  
Unread 02-19-2015, 10:11 PM
VegeKev VegeKev is offline
Senior Member
 
Join Date: Feb 2013
Location: Armidale, NSW Australia
Posts: 163
Default

Haha...I must be getting old cause I'm not sure which one looks better...
Reply With Quote
  #36  
Unread 02-20-2015, 07:29 AM
Roberd42's Avatar
Roberd42 Roberd42 is offline
Senior Member
 
Join Date: Oct 2014
Location: Augusta, GA
Posts: 139
Default

I know which one is cheaper to maintain. ��
Reply With Quote
  #37  
Unread 02-20-2015, 04:18 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

Which would be more fun to ride?
Reply With Quote
  #38  
Unread 02-20-2015, 04:24 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

Is this too shiny? I know it's not correct but....................
Attached Images
File Type: jpg 20150220_122650_zpsxj1ck8k4.jpg (56.5 KB, 17 views)
File Type: jpg 20150220_122700_zpseoohzvwh.jpg (55.0 KB, 17 views)
Reply With Quote
  #39  
Unread 02-21-2015, 12:03 AM
frappy's Avatar
frappy frappy is offline
Senior Member
 
Join Date: Feb 2012
Location: California
Posts: 115
Default

Not too shiny in my book. Plus, it gets partially covered by alot of other parts and it'll dull with age to a nice patina anyway.
Reply With Quote
  #40  
Unread 03-14-2016, 10:56 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

Long time between posts but I have started again. Time for paint prep.


Reply With Quote
  #41  
Unread 03-15-2016, 01:36 AM
ByTheLake's Avatar
ByTheLake ByTheLake is offline
Senior Member
 
Join Date: Oct 2011
Location: Alden, MI USA
Posts: 730
Send a message via AIM to ByTheLake
Default

All set for priming - looks good. A lot of work to get to bare metal. Looking forward to the pictures of the painted parts.

Looking forward to putting some miles on my Benly this season.
Reply With Quote
  #42  
Unread 04-11-2016, 07:06 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

More.

Reply With Quote
  #43  
Unread 04-11-2016, 07:13 PM
Magpie Magpie is offline
Member
 
Join Date: Nov 2010
Location: Victoria, B.C.
Posts: 85
Default

A problem with painting the shock covers. I'm using a primer for plastic bumpers. The primer seemed to stick nicely to the side covers but is easily scratched off the shock covers. I sanded them down and washed them very clean. Any suggestions on another paint to use? Thanks, Cliff.
Reply With Quote
  #44  
Unread 04-12-2016, 01:43 AM
ByTheLake's Avatar
ByTheLake ByTheLake is offline
Senior Member
 
Join Date: Oct 2011
Location: Alden, MI USA
Posts: 730
Send a message via AIM to ByTheLake
Default

I had the same issues with the plastic on the shock covers. I even tried an automotive-grade epoxy primer and it peels off easily if the cover was bent at all. Since I stayed with a black paint, it's not that noticeable, but it was frustrating.

Not the answer you're looking for, but I covered the whole issue up with a pair of vintage hand-made saddlebags I found on eBay:

Reply With Quote
  #45  
Unread 04-12-2016, 06:19 PM
frappy's Avatar
frappy frappy is offline
Senior Member
 
Join Date: Feb 2012
Location: California
Posts: 115
Default

After thoroughly sanding the surface, I've prepped flexible plastic bike parts with SEM 38354 Plastic Prep - a product I got from my local auto body paint supply store. I then prime the surface with a good quality rattle can flexible primer (I use SEM 42013 High Build Primer Surfacer). I recommend a flexible top coat as well to finish the job. In the end, I can't guarantee the paint won't crack or flake when scratched or bent, but using these type of products that are designed specifically for plastic, should increase your odds that it won't.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:00 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.