#1
|
|||
|
|||
Sticking clutch solution
I have always had trouble getting my clutch plates to release after sitting for a while. The bike is very low miles, under 3000. In the past I have ridden around the block holding in the clutch while jabbing the throttle and the rear brake or doing the same on the center stand. I hated the process. Today I tried something that worked perfectly. I started up the bike, took a shop rag and tied the clutch lever in the fully released position while the bike warmed up. I slipped it into gear and voila!! No stall or jerk at all.
|
#2
|
|||
|
|||
stiking cluth
I allways keep the cluth released with a bolt or pencil at the lever end
|
#3
|
|||
|
|||
Do you mean always while the bike is stored or when warming it up? Having it parked or stored the the clutch always released would weaken the springs unnecessarily.
|