View Single Post
  #1  
Unread 12-29-2013, 04:31 PM
kirkdob kirkdob is offline
Junior Member
 
Join Date: Jan 2013
Posts: 6
Default Sticking clutch solution

I have always had trouble getting my clutch plates to release after sitting for a while. The bike is very low miles, under 3000. In the past I have ridden around the block holding in the clutch while jabbing the throttle and the rear brake or doing the same on the center stand. I hated the process. Today I tried something that worked perfectly. I started up the bike, took a shop rag and tied the clutch lever in the fully released position while the bike warmed up. I slipped it into gear and voila!! No stall or jerk at all.
Reply With Quote