update
Well I finally got it mounted and it fired up on the first crank. I didnt run it long because the idle was really high and as soon as i tried to adjust it, it would die. I guess I will have to keep adjusting it until it run normal. There is one concern I have, there is burned oil leaking from the bottom of the exhaust right were it attaches to the bottom of the head. I put that metal gasket up in there but there is still a little play when it is snugged up. I also noticed on the image attached a part (#1) but it is not listed in the inventory. I dont know if the oil out of the bottom is something to worry about, or if it is normal because the seal is not tight.
|