Thread: Time to update the CL70 electrical harness
View Single Post
  #6  
Unread 12-23-2008, 10:10 PM
Smithers's Avatar
Smithers Smithers is offline
Admin
  
Join Date: Feb 2004
Location: San Luis Obispo, CA
Posts: 3,238
Send a message via AIM to Smithers Send a message via Skype™ to Smithers
Default
Now here's a rundown of exactly where each of these wires comes from. Listen closely, it's not that difficult. Follow the numbers.
  1. This is the harness that comes from the engine. IE: condenser, points, neutral switch, coil, alternator. I made extra sure to take care of the wires in the fabric sheathing. They are in extra heavy shielding for a reason.
  2. This is the harness that comes down from the handlebar controls.
  3. These wires loosely route through the rear of the frame to the turn signals and rear brake light.
  4. The wires in this black loom are for turn signal relay and also rear brake light switch (you know.. on the rear brake lever).
  5. Rectifier wires are NOT marked yet but can be seen below. They are the yellow, red/white, green and pink (can barely see the pink) wire loom. Look closely.


**Location of wires that go to engine components** :
Reply With Quote