Ok I didn't realize that I never finished this process! Here we go. I finished it up and took pictures along the way. Now the following is the typical Honda carb. I have cleaned it up very well on the outside but the inside gets an "F" in cleanliness! Here you can see how bad things get inside over the years. As I have said before, you MUST invest in some brand new little screwdrivers so that you have a fighting chance when you remove these little parts from inside the carb. The new screwdriver blades will ensure full contact with the slots when you apply the high force needed to break the soft copper parts free.
Make sure and keep track of every single little piece! They will NOT have these at your local Honda shop!!!
