And the other side with the Benly clutch basket in place. You will want to:
- Re-attach the kickstarter return spring
- Position clutch basket, don't forget the circle clip to hold it!
- Put the oil pump back on with gasket and two 10mm nuts
You probably broke the oil pump gasket when taking it off but it's a very small one so it's easy to cut out a new one. Don't forget to put the retaining clip back on the shaft to hold the clutch basket on there.
There is a threaded hole in the case to the rear of where the clutch basket is. This is just a hole that is there for some reason and it's not used by anything so don't think you forgot to put something in there.