I will try to get a picture of the inside of my CA95 headlight bucket and wiring.
In the meantime,
Power from the harness is connected to the switch. The two position switch transfers power to high or low beam only.
The headlight has three leads. The green wire that connects to the ground ring,
One wire with a single connection and one wire with a duplex connection.
The duplex connection receives the same color from the switch and the same color from the speedo high beam bulb.
The single headlight connector receives the same color from the switch.
Thus, when the ignition switch is at the 2 click up position the light illuminates and you have high low beam.
Looking at you picture, the high beam speedo indicator has a ground arrow pointed at it. This is not a ground.
I also trust that you have cleaned up the switch.
|