FourWheelForum

FourWheelForum (http://www.fourwheelforum.com/index.php)
-   The Honda CA95 / Benly 150 Restoration (http://www.fourwheelforum.com/forumdisplay.php?f=24)
-   -   Engine swap: CD175 (sloper) into CA95 (http://www.fourwheelforum.com/showthread.php?t=2269)

frappy 01-11-2017 03:57 PM

Engine swap: CD175 (sloper) into CA95
 
I looked through this forum and couldn't find anything specifically about swapping a CD175 motor into a CA95. Has anybody tried this swap, and if so, are there any pitfalls or tips/tricks that I should be aware of before starting this project? I am assuming that the top motor mount might need to be swapped or modified. Not worried about exhaust yet, but I assume CA160 or CD175 pipes could be retrofitted. The shape of the battery will be an issue too, because of the 6 to 12 volt conversion. I'll probably have to change out the points and condenser or install an electronic ignition. The reason I am asking in the first place is that I have the chance to pick up a CL175 bottom end and complete wiring harness. I was thinking it would be cool to install a CD175 top end, so that I could have a 12-volt system and 5-speed box, but wouldn't have issues with fitting the CL's dual carbs. Thanks for your thoughts, knowledge, and opinions.


All times are GMT -8. The time now is 10:46 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.