FourWheelForum

FourWheelForum (http://www.fourwheelforum.com/index.php)
-   The Honda CA95 / Benly 150 Restoration (http://www.fourwheelforum.com/forumdisplay.php?f=24)
-   -   Spark plugs (http://www.fourwheelforum.com/showthread.php?t=2255)

rum-rum 09-29-2015 02:45 PM

Spark plugs
 
I just picked up 4 c10 h spark plugs.my manual read that these would fit my Honda benly.i guess my manual was wrong.the thread size is smaller,just goes to show you some manuals are not all correct.the plugs are brand new and in their own alluminum case and am guessing quite collectable so I guess I'll just stick them on the shelf.which plugs are you using in your Honda ...

Nige1100s 09-30-2015 09:09 AM

The UK C95 uses ngk D8HA.

NGK used a strange lettering system for the plug sizes

A is 18mm
B 14mm
C 10mm
D 12mm

Not sure how the worked that out.

The D8HA always come out a nice old fashioned mid brown colour. In a way that plugs don't on modern engines.

rum-rum 09-30-2015 06:24 PM

Plugs
 
thanks for the reply nige1100 from jolly old England,will grab me a set.

Michaelclark50 10-02-2015 07:51 AM

I ran into the same issue buying the c-10h's. They don't fit. My bike came with some D-9H's and that's what I bought to replace. I haven't started it yet but feel they are correct. PM me if you haven't bought any yet and I'll send you two of the D-9H's if you want. I have 8 left. That is 2 1/2 lifetime supply by my count.:D Assuming that is that a member who knows more tells us that is the wrong plug.

rum-rum 10-02-2015 03:05 PM

Plugs
 
thanks for the generous offer on the plugs,I went down and picked up two NGOs hr8hs plugs and they work great,went for a twenty mile spin cruising about 50 mph,and all is good,ps I wish I could post pictures and a short video that I have....

frappy 10-05-2015 10:45 PM

The Honda CA95 Parts Manual lists the following plug sizes and part numbers: (Wow, what a range!)

(D9H), p/n 98066-58710
(D8HS), p/n 98066-58714
(D8HA), p/n 98066-58717
(D9H), p/n 98066-58717-00
(D10HS), p/n 98066-60710
(D10HS), p/n 98066-60714

Like Nige, I am successfully running NGK D8HA's in my '64 CA95 with a '63 motor.


All times are GMT -8. The time now is 10:23 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.