FourWheelForum

FourWheelForum (http://www.fourwheelforum.com/index.php)
-   The Honda CA95 / Benly 150 Restoration (http://www.fourwheelforum.com/forumdisplay.php?f=24)
-   -   exhaut gaskets (http://www.fourwheelforum.com/showthread.php?t=2220)

kartgreen 04-03-2015 06:27 AM

exhaut gaskets
 
If your tired of the goofy wire wound sealing gaskets for the exhaust port try a Harley Sportster part ! Sportsters from 2004 and up have a crossover or connecting pipe between the mufflers that use a grafoil type gasket that works very well as a replacement for the gasket on the CA95's exhaust port .
Harley part # 65927-00 / $ 3.62 for 2 .

Roberd42 04-03-2015 07:21 PM

I used the copper bmw gaskets and cut them down to fit. Good to know another option. Thanks for sharing!

Smithers 04-05-2015 09:44 AM

Awesome. Old exhuast joint gaskets and manifold gaskets are the lowest technology on any motorcycle up until the 90's. Very frustrating.

ByTheLake 04-14-2015 01:30 AM

I used copper Ducati gaskets, which were a perfect fit. The details are in this thread, along with pictures:

http://www.fourwheelforum.com/showth...=ducati&page=2

Roberd42 04-14-2015 03:27 AM

I ordered two from bevel heaven. He still only had only one in stock (as kev had mentioned) and terminated my order. I found a close one on a bulk retailer website but it was 1 mm too small and 1mm too thick. I forwarded that info to bevel heaven as he was interested in a supplier. I ended up using the k100 BMW copper cut down two or three mm into a spring that held itself in well while I mounted the pipes, just like kart green on that thread. Works great so far. Plus I got 4 for $8 on eBay used. I just annealed them before installing.


All times are GMT -8. The time now is 12:13 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.