FourWheelForum

FourWheelForum (http://www.fourwheelforum.com/index.php)
-   1UZ-FE Tuning and Mods (http://www.fourwheelforum.com/forumdisplay.php?f=10)
-   -   Fuel System / Lines etc. (http://www.fourwheelforum.com/showthread.php?t=60)

Smithers 12-27-2006 11:48 PM

Well this is something that needs to be addressed sooner or later. I have taken the hard lines in to have powder coated gloss black. The banjo fitting need to have a nice surface for the aluminum washers to seal up against when they are tightened so I got together some nuts, bolts and washers to put across these surfaces. I put the hardware on them so the sandblasting (prep work for powder coating) wouldn't ruin it. When I got them back I just popped them off and I had perfectly coated parts and a leak free smooth surface.

http://fourwheelperformance.com/phorum/fwf_banjo.jpg

And here are the lines. They were pretty grey from age before this so a nice black really makes them look much better. I'll be using some Aeroquip type connectors here and there but I'll worry about that later.

http://fourwheelperformance.com/phorum/fwf_lines.jpg


All times are GMT -8. The time now is 03:34 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.